Our Products

Aircraft Weighing Systems & Support Equipment

Explore our top of jack load cell systems, platform weighing systems, under axle weighing systems, jack adapters, and replacement parts. Our team can help identify the appropriate equipment based on the aircraft, required capacity, weighing method, and operating requirements.

Top of Jack Load Cell Systems

Aircraft weighing systems that use load cells positioned between approved aircraft jacks and the aircraft jack points. Wired systems are supplied with a digital indicator, while wireless systems are available with either a laptop or handheld display, depending on the selected configuration.

Wireless aircraft weighing kit with three top-of-jack load cells and a handheld display in front of its transit case — Representative image

Wireless Top-of-Jack System

Wireless aircraft weighing systems available for small aircraft through large commercial jets, with load-cell capacities ranging from 5,000 lb to 100,000 lb per cell. Systems are available with either a handheld wireless transceiver or a laptop-based display, depending on the selected configuration. Both options provide individual weighing-point readings and total aircraft weight. Wireless systems can also be configured with more than three load cells per kit to accommodate aircraft requiring additional weighing points.

Configuration: Wireless
Interface: HH2400 handheld transceiver or M2400 Windows laptop display with J.A.W.S. software
Number of load cells: Three and up
Capacity per load cell: 5,000 | 10,000 | 15,000 | 25,000 | 50,000 | 100,000 lb
Total system capacity: 15,000 | 30,000 | 45,000 | 75,000 | 150,000 | 300,000 lb
Units: Lbs & Kgs switchable
Typical application: Portable wireless aircraft weighing
Calibration: NIST traceable calibration included
Optional Components: Top of Jack Adapters - 1.6JA, 3.5JA or 5.0JA

Request a Quote

Wired aircraft weighing kit with three load cells, coiled weighing cables, and a digital indicator in a carrying case — Representative image

Wired Top-of-Jack System

Wired aircraft weighing systems available in configurations for small aircraft through large commercial jets, including business jets, regional aircraft, and transport category aircraft. Load cell capacities range from 5,000 lb to 100,000 lb per cell to accommodate different aircraft weights and weighing requirements.

Configuration: Wired
Interface: M2000 Digital indicator with individual-channel and total-weight readings
Number of load cells: Three
Capacity per load cell: 5,000 | 10,000 | 15,000 | 25,000 | 50,000 | 100,000 lb
Total system capacity: 15,000 | 30,000 | 45,000 | 75,000 | 150,000 | 300,000 lb
Units: Lbs & Kgs switchable
Cable length: 50 ft per load cell
Calibration: NIST traceable calibration included
Optional Components: Top of Jack Adapters - 1.6JA, 3.5JA or 5.0JA

Request a Quote

Platform Weighing Systems

Portable aircraft weighing platforms designed to measure aircraft weight at the wheels. Systems are available in different capacities and configurations for general aviation, helicopters, business aircraft, commercial aircraft, and other aviation applications.

Aircraft weighing platform with an approach ramp, alongside a wired indicator and weighing cables in a transit case — Representative image

Wired Platform Weighing System

Wired aircraft platform weighing systems designed to measure aircraft weight at the wheels. Systems are available with platform capacities ranging from 5,000 lb to 20,000 lb per platform to accommodate different aircraft weights and weighing requirements. Wired configurations use the M2000 digital indicator and are supplied with 50-foot cables for each platform.

Configuration: Wired
Interface: M2000 Digital indicator with individual-channel and total-weight readings
Number of platforms: Three
Capacity per platform: 5,000 | 10,000 | 15,000 | 20,000 lb
Total system capacity: 15,000 | 30,000 | 45,000 | 60,000 lb
Units: Lbs & Kgs switchable
Cable length: 50 ft per platform
Ramps: Three 30-inch cast aluminium ramps with a 7-degree incline
Calibration: NIST traceable calibration included
Optional equipment: Over-run ends

Request a Quote

Aircraft weighing platform with an approach ramp, shown once with a handheld wireless display and once with a laptop running the weighing software — Representative image

Wireless Platform Weighing System

Wireless aircraft platform weighing systems designed to measure aircraft weight at the wheels, with platform capacities ranging from 5,000 lb to 20,000 lb per platform. Systems are available with either a handheld wireless transceiver or a laptop-based display, depending on the selected configuration. Both options provide individual weighing-point readings and total aircraft weight. Wireless systems can also be configured with additional platforms to accommodate aircraft requiring more than three weighing points.

Configuration: Wireless
Interface: HH2400 handheld transceiver or M2400 Windows laptop display with J.A.W.S. software
Number of platforms: Three and up
Capacity per platform: 5,000 | 10,000 | 15,000 | 20,000 lb
Total system capacity: 15,000 | 30,000 | 45,000 | 60,000 lb
Units: Lbs & Kgs switchable
Typical application: Portable wireless aircraft weighing
Ramps: Three 30-inch cast aluminium ramps with a 7-degree incline
Calibration: NIST traceable calibration included
Optional equipment: Over-run ends

Request a Quote

Under Axle Weighing Systems

Aircraft weighing systems that use load cells and purpose-designed weighing jacks positioned beneath the aircraft axles. The appropriate configuration is selected based on the aircraft, axle arrangement, required capacity, and approved weighing procedure.

Three J2400 aircraft weighing jacks of differing heights, each with an extended lifting mast — Representative image

Contact us with your aircraft model, axle arrangement, and capacity requirements. Our team will help identify the appropriate configuration.

Jack Adapters

Adapters designed to connect compatible load cells, aircraft jacks, and aircraft jack points. Adapter selection is based on the aircraft jack-point configuration, jack type, load-cell dimensions, and required capacity.

Three machined top-of-jack adapters of increasing height, labelled TAJA1.6 Standard, TAJA1.6-1.5 and TAJA1.6-3.5 — Representative image

Available models

1.6JA
3.5JA
5.0JA

These adapters are available as optional components for our Top-of-Jack Load Cell Systems. Contact us with your aircraft type and jack-point details, and our team will help identify the appropriate adapter for your application.

Replacement Parts for Existing Systems

Replacement components are available for compatible aircraft weighing systems supplied by Aeroweigh Asia or manufactured by our U.S. manufacturer. When requesting replacement parts, please provide the system model, serial number, part description, and photographs, if available.

Not sure which system you need?

Need Help Selecting a System?

Send us the aircraft manufacturer and model, maximum weight, number of weighing points, preferred weighing method, and delivery country. Our team will help identify the appropriate aircraft weighing system and configuration for your requirements.

Request a System Recommendation